Read the video’s transcript:

    1. Go to the 3D View.

    2. To create the legs: Toolbar > Design > Morph

      Adjust the following Settings

      • Geometry Method: Box

    3. Start the command

      Adjust the following Dimensions using Tab:

      • Dimension 1: 2

      • Dimension 2: 2

      • Distance: 15

    4. Copy the double: Ctrl + Shift + D + Ctrl

      • Distance: 20

    5. Copy the pair: Ctrl + Shift + D + Ctrl

      • Distance: 20

    6. To create the table: Toolbar > Design > Morph

      Adjust the following Settings:

      • Geometry Method: Box

    7. Start the command

      Adjust the following Dimensions using Tab

      • Dimension 1: 22

      • Dimension 2: 42

      • Distance: 2

    1. Select the table

    2. Ctrl + D

    3. Start point

    4. Destination point

    1. Isolate the model using F5

    2. Save as .STL

    3. Set the scale to 1:1