Read the video’s transcript:

1. Download the learning material by clicking on the button at the bottom of this page.
2. Drag and drop the provided STL file from your folder
  or
  Go to File > Import STL
1. Print Settings > Build Plate Adhesion.
2. Build Plate Adhesion Type > Brim.
3. Slice!
1. Go to Print Settings.
2. Set Brim width to: 5.0mm.
3. Slice!
1. Drag the handle on Slices Bar at the right part of the screen all the way down
2. Verify that the whole model touches the plate.
1. Click on the Export G-code button.
2. Save the file.

Exercise 3 - UltiMaker Cura: The Colonnade