Read the video’s transcript:

1. Download the learning material by clicking on the button at the bottom of this page.
2. Drag and drop the provided STL file from your folder
1. Select object.
2. Select the Button Split to Parts in the upper tools.
3. Arrange as you need.
4. Slice and check the time!
1. Go to Print Settings > Infill
2. Set Fill Density: 0%
3. Slice and check the time!
1. Go to Layer and Perimeters > Vertical shells.
2. Change Vertical Shells > Perimeters: 2
3. Slice and check the time!
1. Go to Print Settings > Layer and Perimeters
2. Change Solid Layers > Bottom: 0
3. Slice and check the time! 2h30m
1. Activate Brim.
2. Go to Print Settings > Skirt and Brim
3. Change Brim width: 4mm
4. Slice and check the time!
1. Go to Print Settings > Layers and Perimeters
2. Change the Solid layers > Top 1
3. Slice and check the time!
1. Click on the Export G-code button.
2. Save the file.

Exercise 4 - PrusaSlicer: The Masterplan